Super User
Color Scrollers
Mini Whisper 6"
The Whisper Mini's quiet operation is suitable for use in low-noise environments. Lightweight, durable construction ensures trouble free operation. The internal microprocessor controls the velocity, guaranteeing accurate gel placement - even during rapid scrolling. The fan control is especially useful where the noise factor is of vital importance. Fan operation is accessed via DMX channels and controlled by the lighting console.
Operational modes are set by 8 DIP switches on the color changer unit. When teamed with Compulite control consoles, unique scroller patching, special dark gel and frame setup functions are available in the Scroller Patch menu.
The Compulite Mini Whisper color changer is compatible with all control consoles that output DMX512 lighting control data.
- Spot type: Source 4, Pacific
- Height: 28.5cm (11.22")
- Width: 25cm (9.8")
- Depth: 6.9cm (2.7")
- Front aperture: Ø15.5cm (6.1")
- Weight: 2kg (4.5lb)
- End to end speed: 2 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48 / 24VDC
- Current consumption: 0.6A
- Max number of frames: 16
Frame dimensions:
- Leader frame: 33 cm (13")
- Active: 20cm (7.9")
- Width: 16.5cm (6.5")
- Daisy Chain: 8 Units / PSU
Whisper 8"
Uses two DC servomotors, controlled by an internal microprocessor, to directly drive the color scrolls. The velocity is controlled independently for each motor to ensure correct gel string tension and position. Fan operation is accessed via DMX channels and remotely controlled by the lighting console. Operational modes are set using the 5 DIP switches on the color changer unit. When teamed with Compulite control consoles, unique scroller patching, special dark gel, and frame set up functions are available in the Scroller Patch menu. The Compulite Whisper 1kW-D color changer is compatible with all control consoles that output DMX512 lighting control data. The Whisper D has an internal dark gel feature and a frame snap feature for easy manual operation. An optional 24V operating mode makes Whisper D compatible with various manufacturers' power supply units.
- Spot type: 1kw
- Height: 34.8cm (13.7”)
- Width: 33.7cm (13.3”)
- Depth: 7.4cm (2.9”)
- Front aperture: Ø20cm (7.9")
- Weight: 2.75kg (6.1lb)
- End to end speed: 2.2 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48 / 24VDC
- Current consumption: 0.7A
- Max number of frames: 16
Frame dimensions:
- Leader frame: 46.1 cm (18.1")
- Active: 34.6cm (13.6")
- Width: 20.7cm (8.1")
- Daisy Chain: 8 Units / PSU
Whisper D 10"
Whisper D-2kW uses two DC servomotors, controlled by an internal microprocessor, to directly drive the color scrolls. The velocity is controlled independently for each motor to ensure correct gel string tension and position.Fan operation is accessed via DMX channels and remotely controlled by the lighting console. Operational modes are set using the 5 DIP switches on the colour changer unit. When teamed with Compulite control consoles, unique scroller patching, special dark gel and frame setup functions are available in the Scroller Patch menu. The Compulite Whisper D-2kW colour changer is compatible with all control consoles that output DMX512 lighting control data.
- Spot type: 2kw
- Height: 41.6cm (16.4")
- Width: 38.9cm (15.3")
- Depth: 7.4cm (2.9")
- Front aperture:26.5 (10.4")
- Weight: 3.15kg (6.9lb)
- End to end speed: 2.5 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48 / 24VDC
- Current consumption: 0.7A @ 48V DC
- Max number of frames: 16
Frame dimensions:
- Leader frame: 51.1 cm (20.1")
- Active: 39.6cm (15.6")
- Width: 27.4cm (10.8")
- Daisy Chain: 8 Units / PSU
The Whisper 12"
Designed for wide aperture 2kW fixtures. The Whisper 12's quiet operation is suitable for use in low-noise environments. Lightweight, durable construction ensures trouble free operation. The internal microprocessor controls the velocity, guaranteeing accurate gel placement even during rapid scrolling.The fan control is especially useful where the noise factor is of vital importance. Fan operation is accessed via DMX channels and controlled by the lighting console.Operational modes are set by 8 DIP switches on the colour changer unit. When teamed with Compulite control consoles, unique scroller patching, special dark gel and frame setup functions are available in the Scroller Patch menu.
The Compulite Whisper 12 color changer is compatible with all control consoles that output DMX512 lighting control data.
Spot type: 2Kw Wide
- Spot type: 2kw Wide
- Height: 53.2cm (20.9")
- Width: 45.7cm (18")
- Depth: 10cm (3.9")
- Front aperture: Ø31cm (12.2")
- Weight: 4.5kg (10.1lb)
- End to end speed: 5 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48V DC (24V optional)
- Current consumption: 1A
- Max number of frames: 16
Frame dimensions:
- Leader frame: 66 cm (26")
- Active: 44cm (17.3")
- Width: 35.8cm (14.1")
- Daisy Chain: 4-6 Units / PSU
Whisper C 15"
Combines accurate, high-speed scrolling, low noise operation, and enhanced fan control.
Its quiet operation is suitable for use in low-noise environments. Lightweight, durable construction ensures trouble free operation. The internal microprocessor controls the velocity, guaranteeing accurate gel placement even during rapid scrolling.
The fan control is especially useful where the noise factor is of vital importance. Fan operation is accessed via DMX channels and controlled by the lighting console.
Operational modes are set by 8 DIP switches on the colour changer unit. When teamed with Compulite control consoles, unique scroller patching, special dark gel and frame setup functions are available in the Scroller Patch menu.
The Compulite Whisper C-5kW color changer is compatible with all control consoles that output DMX512 lighting control data.
- Spot type: 5kw
- Height: 58.1cm (22.9")
- Width: 55.7cm (21.9")
- Depth: 10cm (3.9")
- Front aperture: Ø37.8cm (14.9")
- Weight: 6.5kg (14.6lb)
- End to end speed: 3.8 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48V DC ( 24V optional )
- Current consumption: 1.2A @ 48V DC
- Max number of frames: 11/13
Frame dimensions:
- Leader frame: 68.1 cm (26.8")
- Active: 56.6cm (22.3")
- Width: 40.5cm (15.9")
- Daisy Chain: 4-6 Units / PSU
Whisper XL 20"
- Spot type: 6kw
- Height: 72.8cm (28.7")
- Width: 66cm (26")
- Depth: 8.2-10.8cm (3.2" - 4.3")
- Front aperture: Ø52cm (20.5")
- Weight: 7.1kg (16 lb)
- End to end speed: 4.5 sec
- connectors: 4 Pin XLR Daisy Chain
- Power supply: 48V DC ( 24V optional )
- Current consumption: 0.6A @ 48V DC
- Max number of frames: 13
Frame dimensions:
- Leader frame: 92 cm (36.2")
- Active: 67.6cm (26.4")
- Width: 56cm (22")
- Daisy Chain: 4-6 Units / PSU
Whisper Power Supply Unit
The Whisper PSU power supply unit is used to provide both +48VDC power and DMX data to a number of attached Whisper color changers, Corona dousers, and Sunset combined scroller and dowser units. The PSU has a 5pin DMX512 input and through connector, and standard 4pin XLR connectors for the color changers. It is normal practice to create a loop for connecting the color changers as this avoids voltage-drop problems and line terminations. For this reason, both a male and female 4pin connector are provided. The number of Whisper color changers that can be connected to the PSU is dependent upon the type used. For example, up to 18 Mini Whisper, 8 Whisper 2kW/D, or 6 Whisper 5kW/C colour changers could be used. Further information is available on both the Whisper color changers specification sheet and the Whisper PSU specification sheet. The Whisper PSU is also available with an analogue output option. This unit provides 0 to +10 VDC outputs on a 25pin DSub
- Height: 12.5cm (4.9")
- Width: 28.5cm (11.2")
- Depth: 19cm (7.5")
- Weight: 4.5kg (10.1 lb)
- connectors: XLR 5 pin Daisy Chain
XLR 4 pin power + Loop - Power supply: 240VAC ( 110V optional )
Whisper Single Power Supply Unit (PSU1)
The Whisper Single Power Supply Unit (PSU1) is used to provide both +48VDC power and DMX data to a single attached scroller or douser. It is compatible with Whisper color changers, Corona dousers, and Sunset combined scroller and douser units. The PSU has a 5pin DMX512 input and through connector, and a standard 4pin XLR connector for the color changer or douser.
- Height: 5cm (2")
- Width: 21.8cm (8.6")
- Depth: 8.9cm (3.5")
- Weight: 2.1kg (4.6 lb)
- connectors: XLR 5 pin Daisy Chain
XLR 4 pin power - Power supply: 90-264VAC
iControl
Vector iControl
Compulite’s Vector iControl App for iPhone, iPad, iPod and Android devices, is a powerful application to remotely control and edit basic functions for all Vector lighting consoles.
The App provides real-time information about the Console through a friendly user interface. By using the Vector iControl App, users are able to control moving lights, conventional lights, create and store cues and libraries, add groups, control highlights, lowlights and more.
The Application also allows you to control Dimmer levels through an interactive Dimmer wheel, control Pan and Tilt through an interactive trackball, and control all parameters using an interactive wheel, all from a remote location anywhere within your local area network.
Compulite's Vector iControl App is free and available for download from the App Store and from the Google Play store.
Features:
- Full real-time control of all Vector consoles.
- An automatically generated IP list of Vector consoles.
- An echo line (Command line) displaying real-time state of the Console.
- Constant connection monitoring.
- Interactive wheel and trackball.
- Multiple iControls can be connected to one console at a time.
- Ability to control moving and conventional lights.
- Create and control cues, libraries and groups.
- Keyboard view of the console.
- Easy to read panel screen.
- Macro page for controlling Macros faster.
- New default black screen.
- Options menu for changing skin and disconnecting.
- Added arrows to the Trackball foe better control.
- Wheels LCDs are lighten up when a parameter is there.
- Shift key is now lighten up when activated.
- Keys that have a shift function are showing only the normal function text and when shift is pressed the text will be replaced with the shift function text. These keys also have an indication that they have a shift function.
- Reduced texts sizes on keys to make them clearer.
- Small bug fixes.
- A new platform and a new technology to support IOS 11.
- Minor graphical changes.
iControl
Compulite's iControl App for the Apple iPhone and iPod, is a powerful application to remotely control and edit basic functions of all Vector and Dlite lighting consoles.
The App provides real-time information of the Console through a friendly user interface. By using the iControl App, you are able to control moving lights, conventional lights, create and store cues and libraries, add groups, control highlight and lowlight and more.
The Application also allows you to control Pan and Tilt through an interactive trackball as well the ability to control all parameters using an interactive wheel, all from a remote location anywhere within your local area network.
Compulite's iControl App is free and available for download from the App Store.
Features:
- Full real-time control of vector or Dlite consoles.
- An automatically generated IP list of Vector and Dlite consoles.
- An echo line (Command line) displaying real-time state of the Console.
- Constant connection monitoring.
- Interactive wheel and trackball.
- Multiple iControls can be connected to one console at a time.
- Ability to control moving and conventional lights.
- Create and control cues, libraries and groups.
- Keyboard view of the Console.
- Easy to read panel screen.
Version 1.1:
- IOS 3.1.3 compatible.
- The Lock Pan / Tilt button images were fixed.
- There is a new background when in Fine mode.
- New buttons were added to the Wheel and Joystick screens; Next, Prev, Home and Release.
- More Dlite buttons were added.
- You now can select parameters on Dlite.
Version 1.2:
- Added Delete button to the Vector panel. The button is visible when pressing the Home button, after pressing Shift.
- The Vector panel trackball arrows are now responsive to touch.
- Improved trackball sensitivity while in Fine mode.
Version 1.3:
- Faster Marcro page controlling.
- Fixed joystick arrow issues.
- Small bug fixes.
Click here to download the App from the App Store.
Download the app installation and connection guide here.
